Install your Insectagon
Option A
Installing your Insectagon with a 2-way tape is the easiest securing method, this method will save you time inside the
account.
• First remove one side of the 2-way tape and placing it on the back of the station.
• When you are ready to install the Insectagon in your account remove the second side of the tape. Then apply your
Insectagon in areas of concern.
• Apply your preferred bait and close station.
Option B
Installing your Insectagon by a screw will allow for a longer lasting position. This is also recommended in high traffic
areas or when there is a higher risk of children or pets in the area.
• To mount your Insectagon by using a screw first open the Insectagon. You will find a screw placement hole. Place
the screw inside the hole and drive the screw into the surface, for example: cabinet, baseboard, wall, appliances,
deck, fence, or any other areas of concern in your account.
• Close the Insectagon after installing.
Cleaning & Refilling
For cleaning and refilling your Insectagon takes a couple easy steps. Refilling will allow your Insectagon
to sustain the natural pheromones left over from past activity. Giving your Insectagon the advantage in attracting
future activity.
- First open your Insectagon from the install location (there is no need to uninstall during the cleaning and refilling process).
- After you have open your Insectagon pull on the bait box to remove from the station.
- Clean your bait box.
- To reinstall the bait box simply align the indent in the box with the holding tab, then click back into place.
insectagon.ca 